Degassing strength, suitable for refining and production of liquid aluminum and regenerated aluminum with high purification requirements. Containing sodium salt, suitable for most aluminum alloys. With dry nitrogen as carrier and injected into molten aluminum, the molten aluminum can be effectively refined and purified. With uniform particle size and good fluidity, it can adapt to any type of duster.
characteristic:
Degassing strength, suitable for refining and production of liquid aluminum and regenerated aluminum with high purification requirements. Containing sodium salt, suitable for most aluminum alloys. With dry nitrogen as carrier and injected into molten aluminum, the molten aluminum can be effectively refined and purified. With uniform particle size and good fluidity, it can adapt to any type of duster.
consumption:
2.0-2.5kg per ton of molten aluminum.
Usage:
Remove slag and adjust the temperature of molten aluminum to 690-750 ℃.
Put the required amount of powder into the powder sprayer, open the nitrogen gas valve, and then open the switch of the powder sprayer. After the powder is ejected from the powder pipe, it can be inserted into the molten aluminum for refining. It can also be placed in the clock and directly pressed into the molten aluminum for stirring.
be careful:
Nitrogen purity should be greater than 99.99% and not less than 99.9%, otherwise it is difficult to fully display the advantages of powder injection refining.
packing:
20kg per box, 2kg per bag (one ton of aluminum consumption).
keep in storage:
Store in a dry place and dry before use.
US
aboutus
